Hanging nets on upvc windows

How to Hang Net Curtains in a Bay Window The shape of the windows makes it a little difficult to hang net curtains onto bay windows. It involves a quick step by step process — Picking out compatible hardware — Usually, you would need curtain rods that go above the curtains for conventional windows. However, for bay windows, you need curtain rods that go inside the window frame. These are called tension rods. The push themselves into the window frame and are sturdy enough to stay rooted and support a curtain.

Tension rods come in different sizes and you might need more than one depending on the number of frames you have. Also, curtain brackets are no longer a necessity if you decide to use tension rods. Curtain tracks that are flexible to go around the corners of the wall are also viable options. Assessing how much you need — You might have to get anywhere from three to six sections for your curtain rod depending on how many sections your bay window has.

You also need to use as many brackets as the layer of curtains you want to install. For example, for a simple one-layer curtain, you would need only need to use single brackets. For two layers you will need a double bracket. Installing Brackets — The first part of this process is getting the height right. Hanging the curtains higher than the windows make the bay windows look much bigger. About 12 — 16 cm above the frames will be just about enough and you will not have to risk make it excessively big or too close to the ceiling.

Naturally, you need not do this if you are using tension rods. Mark the spots where you want the brackets to go. Once the marks are made, you have to drill into those spots to allow the screw to go in. It is quite important to make sure that the drill is not as big as the curtain screws. This is to make sure that the screws stay firmly in their spot. Hold the brackets and line them up with the holes you drilled and fasten them with curtains screws using a screwdriver.

Hanging the curtain — The first thing to do is divide the curtains into panel. Then it is up to you to decide whether you want two curtain panels per window frame or just one. Well, if no, then we certainly do! Within this area of our site have literally hundreds of how-to guides and tutorials that cover a huge range of home improvement tasks.

Each page also comes with pictures and a video to make completing those jobs even easier! Main navigation. Search this website. The way you add them is via cutting a right angle from cardboard, and then you align it with the window corner. Push the pencil through the mark, this will mark the wall. Turn the cardboard over and then you will be able to install the adhesive hook.

You just need to press on the hook for around 30 seconds or a bit more, just make sure that you remove the adhesive strip first just to be safe. Once you installed the adhesive hook, you should let it dry for around half an hour or more. Add the curtain rod on the adhesive hooks and see if it all holds well. A bit of trial and error might be needed here. However, if you made the right measurements, you should be just fine.

This might seem an impossible job at first. But the more you look into it, the simpler it gets. Aside from using tension rods and adhesive hooks, there are some other great options to focus on as well such as using adhesive products such as adhesive hooks, Gorilla glue or liquid nails. While they are new to the market, they are great if you want to hang your curtains without nails. The idea here is that the receiving end of the magnet will adhere to the wall via the use of an adhesive.

There are no nails required here, just a simple magnetic system to make everything work. There are some brands that create curtain rods which tap behind the wood trim of your window. Then you will be able to install the curtain with ease.