Omniview pro manual

Control up to two for the 2-port unit or four for the 4-port unit computers, using a simple hot key sequence on your keyboard.

AutoScan The AutoScan feature allows you to automatically scan and monitor the activities of all operating computers connected to your Switch, one by one. To preserve signal integrity at high resolutions, Ohm coaxial VGA cabling is required. Flash Upgrade Flash upgradeability allows you to obtain the latest firmware upgrades for your Switch. These upgrades will let your Switch continue to be compatible with the latest devices and computers.

Firmware upgrades are free for the lifetime of the product. Visit belkin. This feature eliminates the need to disconnect and reconnect these devices when switching between computers, and reduces the clutter on your desktop with fewer speakers. Cable Management The designed enclosure offers built-in cable management to contain connected cables.

Once the cables have been connected and the shroud slid into place, the cables are conveniently maintained through the back opening. A lit LED indicates which computer the console has control of. The corresponding direct-access port selector is located next to the LED. When pushed, the LED should light next to the port selector. This reduces cable clutter and eliminates the need to disconnect and reconnect devices when switching between computers.

To support resolutions of up to x 85Hz, use of a Ohm coaxial cable is required to preserve signal integrity. Available in 6-, , and foot lengths. Consider the following when deciding where to place the Switch: whether or not you intend to use the direct-access port selectors; the length of the cables attached to your keyboard, mouse, and monitor; the location of your CPUs from your Console; and the length of the cables you will use to connect your computers to the Switch.

Beyond 15 feet, probability of signal degradation increases, which can cause the device to fail. Cautions and Warnings Avoid having cables near fluorescent lights, air conditioning equipment, or machines that create electrical noise e.

F1DHU 2. With the narrow part of the base facing toward the rear of the housing, align the hooks of the base to the base holes located underneath the housing. Put the hooks through the holes and push the base toward the front of the housing to lock the base into place. Please refer to diagram for assistance.

Power down your computers. Connect the included 9V DC, 1A power supply adapter into an available power outlet. Attach the barrel into the power jack on the Switch to power the unit. The LEDs should illuminate. The operating system will automatically install the Switch. Do this for all USB connections. Do the same for the microphone connection.

Do this for all computers. You are now ready to use your Switch. Note that it will take 1—2 seconds for the video to display after switching. This is due to the refresh rate of the video signal. There is also re-synchronization of the mouse and keyboard signal that takes place.

Hot-key sequences to switch focus, as specified in the manual, are: [scroll lock], [scroll lock], [Arrow Up] - Previous host [scroll lock], [scroll lock], [Arrow Down] - Next host [scroll lock], [scroll lock], [01, Thanks Answer: Thank you for your patience. We have heard back from Belkin. Unfortunately, they do not have a link to a firmware upgrade for this KVM.

There are a number of Dual monitor KVM units on the market today. Unfortunately, this Belkin unit is not one of them. Answer: Thank you for your inquiry. Yes, this unit will support a PC, as long as each machine meets the erquired specifications. Answer: Thank you for your inquiry. Yes, this unit will support a PC, as long as each machine meets the erquired specifications. That being said, according to Belkin, this switch should work with the following operating systems SunSoft Solaris 8, Novell NetWare 5.

Hard to find one and needs to be as cheap as possible. We are not hearing much in the way of Windows 8. It continuously polls for the data, so you need to find a switch the continuously provides the monitor data to the target machines. Unfortunitly, the older, cheaper KVMs just won't have that funcitonality.

Question: Will this switch work with W7 and W8. This desk is the best investment I can think of. Once the product arrived I had to reconnect due to the item being damaged during shipping.

VersaDesk was extremely responsive and sent a new model out quickly. OmniView Monitor Arm - Dual quantity. Verified Buyer. Pleasant surprise that no assembly was required for the desk.